Your trusted moving company
contact@demenagementalex.caFREN
Déménagement ALEX

Affordable MoversMontreal · South Shore · North Shore

TRANSPORT, INSTALLATION AND MAINTENANCE

Pool table moving in Montreal

Your table needs to reach the right address and, above all, regain its place and a properly adjusted playing surface. ALEX organizes disassembly, protection, transport and reinstallation of your pool table in Montreal, on the South Shore and North Shore.

Disassembly · Transport · Reassembly · Leveling · Cloth on request

Pool table being covered for protection. Illustrating how to arrange pool table moving in Montreal.
Table of contents

Define the services before booking

Identify the table, dimensions and construction before planning transport. Send photos of the playing surface, base and access. Confirm disassembly, protection, reinstallation and any finishing work requested.

The quote should specify the agreed tasks. Ask whether packing, protective materials, disassembly, reassembly or an extra stop are included, and identify the preparation you will handle yourself.

Your preparation before the service

  • Give the brand or model and available dimensions.
  • Describe steps, turns and narrow openings.
  • Confirm the destination room and working space.
  • Describe cloth condition and requested work without improvised dismantling.

Keep a contact reachable and notify the team of changes before the appointment. Use the preparation guide for the tasks common to your move.

What affects your estimate

Construction, dimensions, access, disassembly and installation tasks.

Details for your service estimate
Send these detailsWhy they help
Inventory and photosAssess belongings, preparation and special tasks.
Addresses and accessPlan the route, passages and receiving constraints.
Dates and servicesConfirm the time slot and scope of work.

Compare the total for the same services and clarify the terms. Read the price guide and other services if your project combines several needs.

A pool table is prepared piece by piece. Before arranging the truck, we examine the model, slate configuration, cloth condition and passages to use. You receive an estimate distinguishing transport, reassembly, leveling and additional work.

Buying a used table, moving house or rearranging your basement? The right service depends on what needs to happen at pickup and delivery, beyond the number of kilometres.

To arrange pool table moving in Montreal, choose an attentive crew and careful preparation for an excellent start at home.

Assembly or adjustment work on a pool table. Illustrating how to arrange pool table moving in Montreal.

What budget should you allow to move a pool table?

The price depends on the table, its access and the selected service. Disassembling a table and delivering its components involves different work from reassembling it, refitting the cloth and adjusting the playing surface.

The guidelines below concern straightforward situations. They are not packages applicable to every table: one-piece slate, a turning staircase or complex installation requires a separate assessment.

THE SERVICE DETERMINES THE BUDGET

Indicative guidelines in Canadian dollars for the situations described, rather than universal packages. The estimate specifies services, possible surcharges and applicable taxes.

Disassembly and local transport

Indicative guideline for a route under 30 km, standard configuration and few stairs. This guideline excludes complete reinstallation and new cloth.

$430 to $695

Moving within the house

Indicative guideline for moving without road transport. The model, passage between rooms and required operations must be assessed.

$280 to $395

Complete transfer with reassembly and leveling

The price accounts for the model, slate, both access routes and selected installation work.

By estimate

Cloth replacement, rails or repairs

Supply, fitting and replacement parts are detailed according to the table and requested work.

By estimate

What your estimate should distinguish

Ask for disassembly, protection, transport, stairs, reassembly and leveling to be specified. For new cloth, separate supplying the fabric, fitting it on the surface and work on the rails. Travel, materials and applicable taxes should also be listed.

The destination city alone does not determine the amount. A disassembled table delivered to the ground floor cannot be compared directly with a complete table installed in a basement. Compare the same work, beyond the advertised price.

Good preparation starts with the model and slate

An “8-foot” description specifies neither the exact weight, outside dimensions nor number of slate pieces. Photograph the whole table, brand and identification plate, if visible without handling. A manufacturer’s specification sheet is useful when available.

One-piece slate and a surface made of several pieces require different handling. Tell us what you know; there is no need to disassemble the table to answer the request. We also examine the legs, cabinet, rails, pockets and any mechanisms.

Residential pool table

Pocket table, convertible model or family table: configuration and access define the operations.

Heavy or specialized model

Snooker, carom billiards, coin-operated table or one-piece slate: send the model reference for an appropriate assessment.

Brand and existing parts

Brunswick, Canada Billiard, Olhausen or another brand: specify the model and known repairs to prepare the operations and necessary parts.

If your table is under warranty, check moving and installation conditions with the manufacturer or seller before booking. Send us any specific requirements to follow.

From disassembly to play: the service steps

For a complete pool-table moving service, planning covers both addresses. The scope is set before the job so that everyone knows who disassembles, transports and returns the table to use.

  1. Examine the table and access

    Identify components, apparent condition, necessary operations and the handling route. Choose the planned location in the new room.

  2. Disassemble and label components

    Remove the agreed elements according to the model, identify parts and collect hardware. Existing slate pieces are removed and individually protected when the configuration requires it.

  3. Protect and transport

    Protect components separately, prepare passages and organize loading with suitable handling equipment.

  4. Reassemble and adjust

    Rebuild the support, install the slate according to its configuration, check leveling, then refit the cloth, rails and pockets according to the agreed service.

  5. Check with you

    Check stability, surface, finishes and placement. Identify worn parts or work outside the transfer’s scope.

Quality also matters at delivery. Delivery alone does not automatically include reassembly or leveling. Request these operations when you want a reinstalled table rather than delivered components.

Pool table in a room. Illustrating how to arrange pool table moving in Montreal.

Keep the cloth or use the move to replace it?

The original cloth can sometimes be reused. This depends on its condition, attachment method and whether it can be retensioned. We examine the cloth before confirming reuse.

If the fabric is worn, damaged or no longer suits you, request a pool-table cloth replacement alongside installation. Specify the model, desired colour and table use. Fabric availability and quality form part of the proposal.

Cloth and rails: two separate subjects

Fitting fabric on the playing surface differs from replacing rail cloth. Replacing rubber cushions, repairing pockets and other parts are priced separately after examination. New cloth does not replace structural restoration.

To reduce repeated visits, specify your needs in the request: transport only, installation, new cloth or maintenance. We can examine which operations can be combined.

Assembly or adjustment work on a pool table. Illustrating how to arrange pool table moving in Montreal.

Used table: plan pickup before completing the purchase

A table offered at a good price may require extensive disassembly or have difficult access. Before arranging pickup with the seller, gather the information needed to assess the transfer and reinstallation.

  • The table’s brand, model and known dimensions.
  • Photos of the whole table, cloth, rails and visible defects.
  • Floors, doors, stairs and passages at both addresses.
  • Whether all parts are present if the table is already disassembled.
  • The seller’s access date and planned destination placement.

If the table is already in pieces, keep screws and identified parts together. Do not assume reassembly will be straightforward simply because disassembly is complete. Missing or damaged components can change the project.

We can assess pickup from a private seller and installation in your home. The transport assessment does not replace your own check of the purchased table’s condition and value.

Basement, stairs, condo: check the passage as well as the room

The table may fit in the games room while its components cannot pass through the staircase. Examine the entire route: entrance door, landings, turns, headroom and room access.

Photograph passages at both addresses and specify the narrowest dimensions. In a condo, check the elevator reservation, usable dimensions and building rules. Also prepare an authorized space for the truck.

Do not slide an assembled table on its legs to move it a few metres. Moving it within the same house also calls for a method appropriate to the model and a level check after installation. The crew will determine which components to remove and which equipment is needed.

Weight cannot be inferred from the commercial size alone. For an especially heavy table or uncertainty about the floor, have the situation checked by a qualified professional before installation.

Pool table in a room. Illustrating how to arrange pool table moving in Montreal.

Does your new room leave enough playing space?

Distinguish the table’s outside dimensions, useful for placement, from the playing surface between the cushions, used to estimate cue clearance. The commercial size does not replace these measurements.

A first geometric guideline adds two cue lengths to each playing-surface dimension. With a 44 × 88 inch surface and a 57 inch cue, this gives 158 × 202 inches, approximately 4.01 × 5.13 m. This corresponds to the 4 × 8 example in the Canada Billiard clearance guide.

This calculation alone does not account for stroke movement, furniture, columns or doors. Allow the margin suited to your game and check the manufacturer’s plan. The tool below does not assess staircase access or floor load capacity.

Calculate an initial clearance guideline

Enter measurements in inches. The suggested values illustrate a 44 × 88 inch surface; they do not describe every 8-foot table. Measure the playing surface between the cushions.

The result will appear here in inches and metres, with your chosen margin.

This guideline does not guarantee that the room or access is suitable. Check stroke clearance, obstacles and the manufacturer’s plan. No entered measurement is sent or stored by this tool.

Assembly or adjustment work on a pool table. Illustrating how to arrange pool table moving in Montreal.

Storage, renovations or transfer with other furniture

If the games room is not ready, state at the outset whether the table needs to be disassembled, stored and reinstalled later. Storage and a second visit must be distinguished from a direct transfer.

We can prepare components for storage or assess their inclusion in a long-distance move. Duration, protection, storage location and delivery are defined according to the project.

For a residential move or transfer of a commercial establishment, list the pool table separately in the inventory. It requires specific preparation even when travelling with other furniture.

Assembly or adjustment work on a pool table. Illustrating how to arrange pool table moving in Montreal.

Montreal, Laval, South Shore and North Shore: service suited to the route

ALEX assesses pool-table moves in Greater Montreal and nearby areas. Provide both addresses: pickup, destination and access determine preparation far better than a price based solely on a city’s name.

Is your destination missing here? Specify the route in your request. For short-notice pickup, our last-minute moving page explains the information to prepare; availability remains to be confirmed.

ANSWERS BEFORE CONFIRMING

Questions about moving your pool table

Are reassembly and leveling included in the move?

They are included when you choose a complete transfer specifying them in the estimate. A disassembly-and-transport offer does not automatically include reinstallation. Specify the expected result at delivery.

Can we keep the existing cloth?

Reuse may be possible after examining its condition, attachment and margins needed for refitting. Worn or damaged cloth may need replacement. State in the request whether you want to keep it or consider new cloth.

Does a table with one slate piece cost the same?

Not necessarily. One-piece slate changes handling and passage constraints. Send the model, dimensions and access details so the crew can determine the equipment needed and applicable amount.

Can you collect a table bought from a private seller?

Yes, pickup and installation can be assessed using both addresses, the model, photos and access dates. Before buying, also check that the table is complete and its components can reach the planned room.

What if the table is already disassembled?

Send photos of components and available hardware. Specify who disassembled it and known defects. The crew must check the parts present before confirming transport and reassembly operations.

Do you move tables within the same house?

Yes, this kind of move can be assessed separately. Moving a table to another room or floor may require disassembly and leveling even without truck travel between addresses.

How long does the complete service take?

Duration depends on the model, access, table condition and planned work. Transport alone, installation and cloth replacement take different lengths of time. The time slot is assessed after receiving the project information.

Do I need the exact weight to request an estimate?

No. Provide the weight if you have a reliable specification sheet. Otherwise, send the brand, model and photos without trying to lift the slate. Weight should not be invented from the size in feet alone.

Can the table be stored before reinstallation?

We can assess preparation, storage and later installation. Dates, protection, travel and the second visit must be included in the request to establish the scope and budget.

What information should I send for a price?

The brand or identification photo, known dimensions, both addresses, floors and passages, desired date and requested services. Add photos of the table, access and parts needing repair. Unknown information can simply be identified as such.

Questions to clarify before booking

Is cloth replacement automatic?

Confirm whether that work is requested and included. Transport, assembly, adjustment and cloth replacement should be distinguished in the offer.

Can I add a service after booking?

Send the request early and confirm availability, equipment, time and the terms of the updated offer.

USEFUL INFORMATION, IN ONE PLACE

Prepare your call or email.

A photo of the table and access is more useful than an approximate size. This template gathers useful information. Copy and complete it in your email application; attach only necessary photos, without visible personal documents.

Show the message to complete

No request is sent by this page.

The email link opens your email application. Your request will be reviewed with you; no booking is confirmed automatically.

DÉMÉNAGEMENT ALEX

Your table deserves precise preparation.

Tell us what needs moving and what you want ready at delivery. We will prepare a proposal suited to transport and installation.

514-569-4443

CUSTOMER REVIEWS

Customers supported by Déménagement ALEX

Considering pool table moving in Montreal? Read customer experiences with Déménagement ALEX before discussing the scope, preparation and access required for your service.

Sylvie Robichaud★★★★★

Bravo à l’équipe de Nicolas, Sachas et Nikita. Super boulot!! 👍🏻👍🏻👍🏻

L★★★★★

Équipe Nicolai et Sacha sont très professionnels

Amelie Belanger★★★★★

Excellent déménagement par Nikolas, Sasha et Vtalii. Très professionnel et rapide. Nous ont aidé dernière minutes quand nos autres déménageurs ont annulés.

Paul Bernier★★★★★

Alexei and Nicolai provided excellent service. They arranged all my belongings very professionally and handled everything with great care. They even drove all the way to Gaspésie. I would have given them six stars if I could—highly recommended!

Julien Brodeur★★★★★

Rostik and Ilias: Great work from the guys. There on time. Everything went smooth!

Tomi Jaga★★★★★

Michael and Rostic did a great job helping me move. I recommend them

Google · Trustindex

Pool table moving in Montreal · QUOTE

Get an estimate tailored to your address

For pool table moving in Montreal, send Déménagement ALEX the details listed below. Describe the scope, items, addresses and access so the team can assess the work and confirm the services in your quote.

Your pool table

  • Table size, model and photos
  • Slate and dismantling details
  • Pickup and delivery access
  • Assembly or levelling requested

Your arrangements

  • Full pickup and delivery details
  • Contact responsible for access
  • Photos or inventory to assess
  • Scope and availability to confirm

Plan pool table moving in Montreal

Confirm the details with Déménagement ALEX. Service and availability are assessed before booking.

FREE MOVING QUOTE

Let’s plan your move

Two simple steps to get your personalized quote.

  1. 1Contact
  2. 2Your move
Your contact details

Tell us how to reach you.

Your move

A few details to prepare a quote that fits your move.

Your contact details are used only to respond to this request.

Prefer to call? 514-569-4443
Chat with us